1.The product single component, acetic acid type, solidification at room temperature, high strength large plate glass adhesive.

2.Imported adhesive slurry, fast solidification speed, high elastic, high displacement ability, and strong adhesive strength, with good adhesive performance with other construction materials.

3.With good water resistance, weather resistance, anti aging and low-high temperature resistance, Long life service.

4.With high modulus performance after solidification, can bear ±25% expansion displacement of interface.

1.Glass ornaments of all kinds of indoor and outdoor of room, Ambry engineering adhesive seal.

2.Used for installation for small aquarium and adhesive of flat board glass.

3.Bonding seal of all kinds' ceramic brick.

1.It can not be used for structural installation bond.

2.The user must carry out the compatibility and bonding strength test before use this product, confirm the adhesive and base materials conform to construction requirements

3.The surface temperature of base material below 4℃ or over 40℃.Not suitable for carry out the work.

4.The products are acid solidification, it has certain corrosion to concrete, muti pole stone material, film coated glass, copper, lead and zinc coating.

5.The company only give guarantee to the products if conform to quality requirements, will not responsible to the losses during use of the products owning to any accident or improper use.

1.Construction site of sealant adhesive need to special notice for keeping good ventilate environment.

2.Carelessly if the eye touches the no solidification adhesive, wash with volume water and aide for doctor.

3.The user must carry out the compatibility and bonding strength test before use this product, confirm the adhesive and base materials conform to construction requirements.

4.The unsolidification glass adhesive should avoid to touch by children, should put it away the children can't touch.

Transport as per non dangerous products.